On site
Make a 360 tour
360 photos pinned on the plan with a direction arrow, hotspots room to room, and a link for the customer.
Steps
Open the job, then 360 tour.
Take the 360 photos on the phone and pin each one on the plan where you stood, with its direction.
Add hotspots so people can walk from room to room. The mini map shows where they are looking.
Share the tour link. It works without a login, can expire, and you can turn it off.
In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.
Related guides
- Run a guided inspection
- Send the inspection report
- Do a TREC home inspection
- Do a Texas wood destroying insect report
- Draw a house plan in Field CAD
- Turn a plan picture into a drawing
- Place piers around the house
- Scan the whole house with LiDAR
- Start a drawing from the address
- Elevation readings and the heat map
- A reference point for each area of the house
- Add stairs and porch steps
- Measure a roof and send the roof report
- Turn an area into materials with kits
- Record the products you apply
- Keep each home equipment and its service history
- Plan drainage and grading
- Fill the elevation survey by voice
- Track cracks over time
- The yearly follow-up visit