On site
Add stairs and porch steps
Place a flight of stairs or porch steps, set its risers, size and direction. It prints on the plan and climbs in 3D.
Steps
In a drawing tap More tools, then Furniture, then Stairs (inside) or Porch steps (outside).
Tap the plan where it goes. Next to a wall it lines up with the wall. Drag it to move it, the knob in front turns it.
Tap UP on its bar to make it DN (it goes down from this floor), and tap again to turn it back.
Tap ••• for Risers…, Width… and Run length… on the keypad. The + duplicates it, like everything else.
In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.
Related guides
- Draw a house plan in Field CAD
- Show the drawing in 3D and share it
- A reference point for each area of the house
- Run a guided inspection
- Send the inspection report
- Do a TREC home inspection
- Do a Texas wood destroying insect report
- Turn a plan picture into a drawing
- Place piers around the house
- Scan the whole house with LiDAR
- Start a drawing from the address
- Elevation readings and the heat map
- Measure a roof and send the roof report
- Turn an area into materials with kits
- Record the products you apply
- Keep each home equipment and its service history
- Plan drainage and grading
- Fill the elevation survey by voice
- Track cracks over time
- The yearly follow-up visit
- Take and file job photos
- Make a 360 tour