Turn a plan picture into a drawing
A screenshot from ArcSite, a scan or a photo of a sketch, put to scale and traced or redrawn by the AI.
Steps
Open the drawing, tap More, then Import a plan, PDF or aerial, and pick the picture.
The line under the top bar says what to do next. First set the scale: drag across a size printed on the picture, like 17 feet.
The keypad asks how long that is. Type 17 and tap Done. The picture grows or shrinks to that size.
Trace the walls over the picture, or tap Redraw with AI. The AI reads the walls, rooms, printed sizes, readings and piers and draws them on top. It can take up to 2 minutes, and Cancel stops it.
If it could not read the plan it says why. Tap Try again, or crop the picture to just the plan first.
Check the walls against the picture, tap any length to fix it, then tap Done on the line under the top bar. Undo takes the whole AI drawing out.
Drew it by hand? Pick Recreate from a picture or file and choose the photo of the sketch with its measurements. The written numbers win, so corners come out square and every side gets its number. If the numbers do not add up, the sides in red say by how much. Tap one, type the real length, then tap Use it.
In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.
Related guides
- Run a guided inspection
- Send the inspection report
- Do a TREC home inspection
- Do a Texas wood destroying insect report
- Scan the whole house with LiDAR
- Start a drawing from the address
- Show the drawing in 3D and share it
- Elevation readings and the heat map
- A reference point for each area of the house
- Add stairs and porch steps
- Measure a roof and send the roof report
- Turn an area into materials with kits
- Record the products you apply
- Keep each home equipment and its service history
- Plan drainage and grading
- Fill the elevation survey by voice
- Track cracks over time
- The yearly follow-up visit
- Take and file job photos
- Make a 360 tour