On site
Measure a roof and send the roof report
Trace the roof with its overhang, set the pitch, and send a branded roof report in English or Spanish.
Steps
Start a drawing from the job's address so the satellite picture is under it.
Pick the Roof tool and trace the roof edge with its overhang. Eaves, rakes, ridges and valleys label themselves.
Set the Pitch for the whole structure or for each face, from the chips or by typing it.
Check squares, waste and materials. Gutters are sized with the job's own rainfall.
Send the Roof report: a branded PDF with diagrams, facets, waste, materials and the gutter table.
In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.
Related guides
- Run a guided inspection
- Send the inspection report
- Do a TREC home inspection
- Do a Texas wood destroying insect report
- Draw a house plan in Field CAD
- Turn a plan picture into a drawing
- Place piers around the house
- Scan the whole house with LiDAR
- Start a drawing from the address
- Show the drawing in 3D and share it
- Elevation readings and the heat map
- A reference point for each area of the house
- Add stairs and porch steps
- Turn an area into materials with kits
- Record the products you apply
- Keep each home equipment and its service history
- Plan drainage and grading
- Fill the elevation survey by voice
- Track cracks over time
- The yearly follow-up visit
- Take and file job photos
- Make a 360 tour