On site
Plan drainage and grading
Fall per drain run with the 1% check, cut and fill, and water-flow arrows, plus soil and flood facts.
Steps
Draw the drain run in Field CAD. Tap it, then More, and type the inlet and outlet levels.
The fall shows in percent. Under 1% or an outlet above its inlet turns red.
Add spot grades and areas for cut and fill. Today and After arrows show where the water goes.
The job's Site facts show soil (USDA) and the flood zone (FEMA), each with its source.
In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.
Related guides
- Run a guided inspection
- Send the inspection report
- Do a TREC home inspection
- Do a Texas wood destroying insect report
- Draw a house plan in Field CAD
- Turn a plan picture into a drawing
- Place piers around the house
- Scan the whole house with LiDAR
- Show the drawing in 3D and share it
- Elevation readings and the heat map
- A reference point for each area of the house
- Add stairs and porch steps
- Measure a roof and send the roof report
- Record the products you apply
- Keep each home equipment and its service history
- Fill the elevation survey by voice
- Track cracks over time
- The yearly follow-up visit
- Take and file job photos
- Make a 360 tour