Place piers around the house
Your own pier products, every N feet around the outline or in a row on a beam line, in a few taps.
Steps
Add your pier products first: Price book, then Add an item, and turn on Pier product. Field CAD only offers your own piers.
Open Field CAD and tap New drawing. Or open the drawing already saved on the job.
Pick Blank and draw the outside walls with Wall, typing each real length.
Tap More, then Piers. Pick your pier product in the bar.
Tap Around. The preview puts a pier on every corner and along the wall line. Set the spacing, for example 8 for every 8 feet.
Tap Place to drop them. For a row on a beam line, draw the beam with Wall, then use Along walls and tap that line.
To fix one pier, drag it or tap Delete pier. Respace spreads the set again. The count goes to the takeoff and the proposal.
In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.
Related guides
- Run a guided inspection
- Send the inspection report
- Do a TREC home inspection
- Do a Texas wood destroying insect report
- Turn a plan picture into a drawing
- Scan the whole house with LiDAR
- Start a drawing from the address
- Show the drawing in 3D and share it
- A reference point for each area of the house
- Add stairs and porch steps
- Measure a roof and send the roof report
- Turn an area into materials with kits
- Record the products you apply
- Keep each home equipment and its service history
- Plan drainage and grading
- Fill the elevation survey by voice
- Track cracks over time
- The yearly follow-up visit
- Take and file job photos
- Make a 360 tour