# Turn a plan picture into a drawing

A screenshot from ArcSite, a scan or a photo of a sketch, put to scale and traced or redrawn by the AI.

5 min · For Owner or manager, Estimator or inspector · Every trade

## Steps

1. Open the drawing, tap **More**, then **Import a plan, PDF or aerial**, and pick the picture.
2. The line under the top bar says what to do next. First set the scale: drag across a size printed on the picture, like 17 feet.
3. The keypad asks how long that is. Type 17 and tap **Done**. The picture grows or shrinks to that size.
4. Trace the walls over the picture, or tap **Redraw with AI**. The AI reads the walls, rooms, printed sizes, readings and piers and draws them on top. It can take up to 2 minutes, and **Cancel** stops it.
5. If it could not read the plan it says why. Tap **Try again**, or crop the picture to just the plan first.
6. Check the walls against the picture, tap any length to fix it, then tap **Done** on the line under the top bar. Undo takes the whole AI drawing out.
7. Drew it by hand? Pick **Recreate from a picture or file** and choose the photo of the sketch with its measurements. The written numbers win, so corners come out square and every side gets its number. If the numbers do not add up, the sides in red say by how much. Tap one, type the real length, then tap **Use it**.

In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.

## Related guides

- [Draw a house plan in Field CAD](https://followstack.ai/help/field-cad/)
- [Place piers around the house](https://followstack.ai/help/field-cad-piers/)

https://followstack.ai/help/cad-from-picture/
