Roof square calculator
Enter the house footprint seen from above, overhangs included, and the roof pitch. The roof square calculator turns it into the sloped roof area, the number of squares, the shingle bundles and the underlayment rolls to order, and shows the math.
It runs in your browser, so nothing is sent unless you ask us to write to you. FollowStack's Roof mode measures each facet on the satellite view and writes the same numbers into the roof report.
Count the squares
Want every facet measured for you?
FollowStack's Roof mode traces the roof on the satellite view, sets the pitch of each facet and writes squares, waste, ridge, hips, valleys and gutters into a branded roof report. Leave your email and we will show you.
Thanks. We will be in touch.
We will write back within one business day to set a time to show you the roof report.
Roof pitch multipliers
The multiplier is the sloped length of one foot of level run. Multiply the footprint by it to get the roof surface. The steeper the roof, the more surface the same house carries.
| Pitch | Multiplier |
|---|---|
| 2/12 | 1.014 |
| 3/12 | 1.031 |
| 4/12 | 1.054 |
| 5/12 | 1.083 |
| 6/12 | 1.118 |
| 7/12 | 1.158 |
| 8/12 | 1.202 |
| 9/12 | 1.250 |
| 10/12 | 1.302 |
| 12/12 | 1.414 |
| 14/12 | 1.537 |
| 16/12 | 1.667 |
How the calculator works
Roof area = footprint × pitch multiplier, and one square is 100 sq ft of roof. The waste for the roof's shape is added before rounding up to whole bundles, three to a square, and synthetic underlayment rolls of about 10 squares each.
It treats the roof as one pitch. A roof with several pitches, or a second story over a porch, is closer when each part is measured on its own. Starter strip, ridge cap, drip edge and flashing come from the eave, ridge and wall lengths, which this tool does not ask for.
Measuring roofs every week? See the roof measurement app, roofing software, the gutter size calculator and Roof mode and takeoffs.
Questions
What is a roofing square?
A square is 100 square feet of roof surface. A 2,236 sq ft roof is 22.36 squares. Shingles are sold by the square, usually three bundles to a square, so roofers price and order everything in squares.
How do I measure a roof for squares?
Measure the footprint from the ground or on a satellite view, including the overhangs, and multiply by the pitch multiplier. A 6/12 roof has a multiplier of 1.118, so a 2,000 sq ft footprint is about 2,236 sq ft of roof, or 22.36 squares before waste.
How much waste should I add for shingles?
Start with about 10 percent for a simple gable roof, 15 percent for a hip roof, and 20 percent for a cut-up roof with valleys, dormers and many facets. Starter strip and ridge cap are ordered on their own from the eave and ridge lengths.
How many bundles of shingles are in a square?
Most three-tab and architectural shingles come three bundles to a square. Some heavier designer shingles take four or five bundles, so check the wrapper of the shingle you are buying.
How many rolls of underlayment do I need?
A typical synthetic underlayment roll covers about 10 squares. Felt rolls cover less, often 2 to 4 squares, so divide the squares by what your roll says on the label.
Measure the roof and send the report from FollowStack
Roof mode traces the roof on the satellite view, sets each pitch and writes the squares, waste and gutters into a report with your logo.