Fence cost calculator
Enter the length of the fence, the type, the gates and whether an old fence comes out. The fence cost calculator gives an installed cost range and the posts, concrete, rails and pickets for the run. Contractors can type their own price per foot to quote the job.
It runs in your browser, so nothing is sent unless you ask us to write to you. In FollowStack you draw the fence line on the lot, and the quote counts the posts, gates and materials from the drawing.
Price the fence
Quote fences from the drawing?
FollowStack draws the fence line on the lot, counts the posts, gates and materials, checks 811 before the dig and sends the quote the customer signs. Leave your email and we will show you.
Thanks. We will be in touch.
We will write back within one business day to set a time to show you how FollowStack quotes a fence.
Installed fence prices per foot
Rough U.S. ranges for 2026, installed, for each type at its usual height. Material prices, soil, slope and labor in your area move the real number, so a contractor's own price per foot is the better input.
| Fence | Per foot, installed |
|---|---|
| Wood privacy, 6 ft | $25 to $45 |
| Wood picket, 4 ft | $18 to $32 |
| Chain link, 4 ft | $14 to $28 |
| Vinyl privacy, 6 ft | $30 to $55 |
| Aluminum, 4 ft | $32 to $60 |
| Wrought iron, 4 ft | $40 to $85 |
| Split rail, 3 ft | $14 to $26 |
| Walk gate, each | $350 to $900 |
| Tear-out and haul-off | $3 to $6 |
How the calculator works
Cost = fence length × price per foot, plus each gate and the tear-out if an old fence comes down. Posts go every 8 ft, with one more at the end and one for each gate, and each post takes two 50 lb bags of concrete. A wood privacy section takes three rails and about 17 pickets, and a picket section two rails and about 12.
Corners, slopes, rock and long gate spans add posts and labor that a straight-run estimate does not see. Call 811 before anyone digs.
Quoting fences every week? See the fence estimating software, hardscape software and takeoffs from the drawing.
Questions
How much does a fence cost per foot?
As a rough guide for 2026, installed prices run about $25 to $45 a foot for a 6 ft wood privacy fence, $14 to $28 for 4 ft chain link, $30 to $55 for 6 ft vinyl, $32 to $60 for aluminum and $40 to $85 for wrought iron. Your local material prices, soil and labor set the real number.
How many fence posts do I need?
Divide the fence length by the post spacing, usually 8 feet, round up, and add one for the end. Each gate needs one more post. A 150 ft run is 19 sections and 20 posts, plus one for a gate.
How much concrete does a fence post take?
Plan on about two 50 lb bags of concrete mix for a typical 4x4 post set 2 feet deep in a 10 inch hole. Corner, end and gate posts are often set deeper and take more.
How do contractors estimate a fence job?
Measure each run on site or on the satellite view, count the gates and corners, and price it per foot with the posts, concrete and hardware counted from the run. Add tear-out and haul-off when an old fence comes down, and call 811 before you dig.
Draw the fence line and send the quote from FollowStack
Draw each run on the lot, count the posts and gates from the drawing, check 811 and send the quote the customer signs and pays the deposit on.