# Draw a house plan in Field CAD

Outside walls with real lengths, rooms, doors and windows. The takeoff adds up as you draw.

8 min · For Owner or manager, Estimator or inspector · Every trade

## Steps

1. Field CAD is an add-on. An owner switches it on in **Phones & booking**, then Company & domain, then Add-ons.
2. Open **Field CAD** and tap **New drawing**. Or open the drawing already saved on the job. A drawing made on the iPad or a phone shows on every other device, also on the lead or customer.
3. Pick **Blank**. Tap **Wall** and keep the mode on Continuous, so each wall starts where the last one ended.
4. Start at an outside corner. Drag the first wall and lift. Tap the length on the wall and type the real one, like 16 for 16 feet.
5. Go around the house one wall at a time. Drag the last wall back onto the first corner to close it. The area shows in the middle.
6. Add inside walls the same way, tap each room's name to pick Bedroom, Bath, Kitchen and so on, then add **Door** and **Window** on the walls.
7. Check the takeoff, then save the plan and add it to the proposal as the repair plan.
8. Tracing over a plan or an aerial? Tap **More**, then **Import a plan, PDF or aerial**, then **Set scale** on a length you know.

In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.

## Related guides

- [Turn a plan picture into a drawing](https://followstack.ai/help/cad-from-picture/)
- [Place piers around the house](https://followstack.ai/help/field-cad-piers/)
- [Scan the whole house with LiDAR](https://followstack.ai/help/lidar-scan/)
- [Start a drawing from the address](https://followstack.ai/help/address-prefill/)

https://followstack.ai/help/field-cad/
