# A reference point for each area of the house

A slab house with a pier and beam addition, a garage that steps down, a porch: give each area its own 0.0 so each gets its own spread.

3 min · For Owner or manager, Estimator or inspector · Foundation repair

## Steps

1. Draw the outline of each area (a room or a rectangle). Tap it, then tap **Own reference point** on the bar (on a phone: **•••**, **Own reference point (0.0)…**).
2. Pick the name (**Main house**, **Addition**, **Garage**, **Porch**, **Patio** or **Other…**), then the foundation: **Slab on grade**, **Pier & beam** or **Other**.
3. Type the readings as usual. Each reading belongs to the area it sits in. To move one, tap it, **•••**, **Move to zone…**.
4. Tap the reading you shot as that area's zero and tap **Set as reference for this zone**. Only that area's readings change.
5. A porch or patio you do not want in the house numbers: tap it, **•••**, **Leave out of the house spread**.
6. The heat map colors each area on its own, its legend lists each area with its foundation and spread, and the proposal's findings give each area its own range.

In the app, open Help & guides and tap Show me: FollowStack points at each button as you go.

## Related guides

- [Elevation readings and the heat map](https://followstack.ai/help/heat-map/)
- [Draw a house plan in Field CAD](https://followstack.ai/help/field-cad/)
- [Fill the elevation survey by voice](https://followstack.ai/help/voice-survey/)

https://followstack.ai/help/elevation-areas/
